General Forum - spreader beam in front of mast

Print Page | Close Window

spreader beam in front of mast

Printed From: Laser 28 International Class Association
Category: Laser 28 General
Forum Name: General Forum
Forum Description: All the topics that don't fit elsewhere
URL: http://www.laser28.org/forum/forum_posts.asp?TID=812
Printed Date: 22 November 2024 at 9:44pm
Software Version: Web Wiz Forums 11.03 - http://www.webwizforums.com

Topic: spreader beam in front of mast

Posted By: Virginia H.
Subject: spreader beam in front of mast
Date Posted: 11 February 2019 at 7:01pm

I have an old drawing that shows a 1"x3" aluminum bar in front of the mast to hold the fiberglass ring apart to keep shrouds tight. The space i have in front go the mast is between 3/4" and 7/8". I was thinking of using a piece of oak wood finished 3/4" and on the other side of the forward bulkhead use the 1"x3" aluminum bar and bolt all together. I would use blocks of wood between the bars and the fiberglass rings. Would that work?

Thank you