Print Page | Close Window

Paint for lower saildrive unit?

Printed From: Laser 28 International Class Association
Category: Laser 28 General
Forum Name: Maintenance
Forum Description: All the things to care for your boat
URL: http://www.laser28.org/forum/forum_posts.asp?TID=557
Printed Date: 31 October 2024 at 7:58pm
Software Version: Web Wiz Forums 11.03 - http://www.webwizforums.com


Topic: Paint for lower saildrive unit?
Posted By: WJRyan
Subject: Paint for lower saildrive unit?
Date Posted: 28 April 2012 at 7:18am
First you sand, then you prime, then you paint - what do you use? When I bought the boat the prior owner provided a can of "Alumaspray antifoulant (#1116 white)" from Pettit but I can't find that so what is the recommended alternative?  Thanks everyone!  :)Bill

-------------
Bill Ryan,

Room4Crew, #155



Replies:
Posted By: Bill Layton
Date Posted: 28 April 2012 at 7:26am
Sand to bare aluminum, fill any deficiencies with epoxy filler, any type, then coat with interlux interprotect barrier coat system 4-5 coats. If you plan to sand smooth afterwards add an extra coat or two. No need to put antifouling paint on. This is the best system for the leg that I have seen. Be sure not to paint over the zinc annode. 


Posted By: WJRyan
Date Posted: 30 April 2012 at 6:11am
Thank you!!

-------------
Bill Ryan,

Room4Crew, #155



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.03 - http://www.webwizforums.com
Copyright ©2001-2015 Web Wiz Ltd. - http://www.webwiz.co.uk