Maintenance - Motor mounts

Print Page | Close Window

Motor mounts

Printed From: Laser 28 International Class Association
Category: Laser 28 General
Forum Name: Maintenance
Forum Description: All the things to care for your boat
URL: http://www.laser28.org/forum/forum_posts.asp?TID=528
Printed Date: 23 November 2024 at 7:29pm
Software Version: Web Wiz Forums 11.03 - http://www.webwizforums.com

Topic: Motor mounts

Posted By: fatjohnz
Subject: Motor mounts
Date Posted: 09 January 2012 at 10:28am

During a delivery this summer, the starboard side of the motor mount bracket on the front of the engine broke where it attaches to the shock absorber. We lashed it back together with spectra and zip ties.
Yesterday, as I started to remove the bracket, I could see that the port side of the metal bracket had broken in the same place.
I'm debating whether to buy a replacement or take the broken one to the metal shop for re-enforcing/repair.
Any comments? thx, john

Replies:

Posted By: fatjohnz
Date Posted: 12 January 2012 at 11:11am

I thought the local welder would be concerned about the strength of the repair as the breaks were at the bolt hole tabs. As it turned out, zip zip, welded up stronger than new for $25. js

Posted By: Bill Layton
Date Posted: 12 January 2012 at 11:16am

Yes I repaired mine too and re-inforced it. Its the only alternative really as buying a new one would be outrageous cost wise.

Posted By: WJRyan
Date Posted: 12 January 2012 at 11:33am

forgive my lack of engine knowledge but do you have a picture? I don't know what to look for and if this is aproblem area this is a good time to get it fixed! :)bill

-------------
Bill Ryan,

Room4Crew, #155