Maintenance - Cutting tool

Print Page | Close Window

Cutting tool

Printed From: Laser 28 International Class Association
Category: Laser 28 General
Forum Name: Maintenance
Forum Description: All the things to care for your boat
URL: http://www.laser28.org/forum/forum_posts.asp?TID=501
Printed Date: 23 November 2024 at 8:35pm
Software Version: Web Wiz Forums 11.03 - http://www.webwizforums.com

Topic: Cutting tool

Posted By: Hoodoo
Subject: Cutting tool
Date Posted: 27 October 2011 at 3:51pm

Wich tool is best suited to cut the kevlar hull of the L28? I need to cut a hole in my port cockpit seat to install a Lewmar window.
Thanks

Replies:

Posted By: Jon167
Date Posted: 27 October 2011 at 11:22pm

rotozip with spiral bit

Posted By: Mad Max
Date Posted: 03 November 2011 at 6:49pm

I used a sawzall with fine hacksaw blade. Drill the 4 corners first with a drill diameter to match the radius of the corners.

-------------
Dick #122

Posted By: Hoodoo
Date Posted: 03 November 2011 at 9:33pm

I like that technique. Thanks!

Posted By: Jon167
Date Posted: 03 November 2011 at 11:22pm

the only thing that worries me about a sawzall is the vibration can have a bad effect with gelcoat chipping and cracking.........just my 2cents

Posted By: Mad Max
Date Posted: 04 November 2011 at 5:04pm

Another option which works great on fiberglass is a 4 1/2 inch angle grinder using a thin fiber disk for cutting steel. Lots of dust.

-------------
Dick #122