forward hatch cover

Hi Bob,
Laser28 hatches are tough to procure. It's a custom item, I'm afraid.
What I've done is send a request to eplastics.com along with a template they can use to form the new hatch on. The person at eplastics who has responded to my requests is James Waller (San Diego).
If your existing hatch is still intact, you could send that as a template. I would add some blocking at the front and rear under the peak of the curve. I've had my template compress under the pressure which results in a slightly flatter hatch than you would want.
If your hatch can't be used as a template then what I have done is build a plug. I took a few pieces of thin Luan and cut them to hatch size. Then put the 1st piece in the hatch hole, add glue to the top and apply the next piece and so on. Then press them into position with some bricks. I've also used this plug as a hatch cover in a pinch. lol
I ruined my last plug trying to fine tune the fit. Otherwise, I'd loan it to you.
john

If your hatch cover works as a template, hang on to it. I may ask to borrow it in the future. john

Thanks Ron, I've joined.
john

Hank Prenger at P&A Plastics in Hamilton Ontario.  Had one made in 2022.  Cost was $294