replacement cushions

The boards are the same size as the cushions. (within a few millimeters) The cushion without a board is called a "filler cushion", a triangular cushion that fills the gap left when the 4 dinette cushions are placed on the dinette table. It was designed this way. Good idea on the epoxy. The original foam is light weight and density and dries within a few hours if completely soaked.... same with the covers. I've personally taken a wave in thru the open front hatch in the afternoon and slept on dry cushions that night. I've seen some owners replace them with a much heavier density foam and of course the effect is opposite. Food for thought. Goodluck!

Edited by Bill Layton - 13 May 2013 at 10:49pm

Could I get one of you to email me pictures of your cushions on the dinette with the table in the down position that way I could get an idea what the triangle cushions goes? When i put the 2 back rest cushions on the dinette table I do not see how the triangle would work.

Sorry, but I have never actually dropped my table and used it as a bunk, However when you speak of a triangular piece of cushion, it is really a filler cushion that goes all the way up in the bow portion of the V-birth. That is the only place that forms a triangle.

thank you.